BAJA DESIGNS LED Dome Light w/Switch
Baja Designs high-performance Dome Lights are waterproof and can be mounted virtually anywhere. All that is needed is 12V power to illuminate your cab, engine bay, wheel wells or anywhere else you need a bright and smooth 180 degree compact LED aux light.
Available in 5 colors (white, red, amber, blue, and green), LED Dome Lights feature an integrated switch for convenience.
The Dome Light is very similar to the Rock Light in terms of: LED output, color options, 180 degree spread, and power draw. However the Dome Light also features an on/off switch.
Baja Designs LED Dome Light w/Switch Features
Dome Light w/Switch Key Features
- 400 Lumens
- Includes tube mounts (curved backing)
- Convenient on/off switch
- Waterproof
Satisfactions Guarantee – 30 Day Money Back Guarantee
Limited Lifetime Warranty – Complete Purchase Protection
Baja Designs LED Dome Light w/Switch Specifications & Dimensions
Lumens: 400
Wattage/Amps: 4W / 0.4 A
Dimensions: 2.7" H x 1.2" W x .45" D
Weight: 1.8 oz
Ambient Temperature: -40F to 145.4F
Input Voltage: 12 - 14 V DC
LED Life Expectancy: 49,930 Hours
Front Lens: Hard Coated Polycarbonate
Housing: Aircraft Grade Aluminum w/Mil-Spec Hard Anodize
Hardware & Bracket Material: Stainless Steel
Standards of Compliance:
Exceeds MIL-STD810G (Mil-Spec Testing)
* Analog Board Design does not Produce High Frequency Noise
Built-In Overvoltage Protection
IP69K (Waterproof up to 9ft & Pressure Washable)
IK10 Compliant (Mechanical Impact Testing)
Caution: Dome Lights can get very hot when used for long periods of time. Please use caution when handling or installing.
LED Dome Light Wiring Requirements & Installation
PLEASE NOTE: all Baja Designs lighting products need to be wired in to 12V power. Installation of a wiring harness and/or accessories not included with purchase of the light will likely be required.
To discuss wiring options and get set up with a package that includes an appropriate wiring harness; or to request installation assistance, please don't hesitate to get in touch. We also offer & install sPOD switch controllers if you want a clean solution to integrate all your 12V accessories.
Baja Designs Dome Light w/Switch Installation Options
- Utilizing the included tube mount, install the shorter M4 hardware through the rock light and overmold secure the back with the provide M4 nuts. Once the rock light has been installed you can slide the provided zip tie through the zip tie channel followed by securing the dome light and tube mount to the desired location.
- Drill and tap two M4 x 0.7 holes while utilizing the longer M4 bolts mount the dome light unit to your vehicle. The dome light requires 12V power. The red wire is positive and the black wire is ground. The unit can become hot so be careful it is not mounted near anything that may melt or be damaged by the heat.